Ashford
Ashford Metal Bobbin Winder
Ashford Metal Bobbin Winder
Traditional craftsmanship
Creativity and self-expression
Relaxation and stress relief
Delivery time: 6 to 12 days
For delivery within the EU.
Couldn't load pickup availability
Fill your bobbins quickly and evenly
Weaving with a boat shuttle means you need full bobbins, and usually lots of them. The Ashford metal bobbin winder lets you wind yarn quickly and evenly. Clamp it to the edge of a table, slide the bobbin onto the spindle and turn the crank. The large gear wheel turns every turn of the crank into many turns of the bobbin.
What sets the metal version apart
- strong, robust metal construction, crank with wooden handle
- built-in table clamp
- tapered spindle, 4 to 5.5 mm diameter
- supplied fully assembled
- one nylon boat shuttle bobbin included
These details come from Ashford. The winder is made in New Zealand, where Ashford has been building looms and spinning wheels for decades.
Which bobbins fit?
The spindle is tapered, so bobbins with different bore sizes sit firmly as long as the bore is between 4 and 5.5 mm. The winder is made for the bobbins of Ashford boat shuttles. We stock spare Ashford bobbins in packs of 10, in standard and XL nylon and in cardboard. For bobbins from other makers, just check the inner diameter.
Metal or wood?
Ashford also makes the Ashford wooden bobbin winder with table clamp and the same spindle size. It costs less and runs on a drive band. The metal version is more heavily built, gear driven and arrives assembled. If you weave a lot with a shuttle, or the winder is shared in a guild or a class, it is the sturdier choice.
Matching accessories
The shuttle itself is available as the Ashford boat shuttle in 29 cm and 38 cm with XL bobbin. For band weaving there is the Ashford band weaving shuttle.
Frequently asked questions
Is a bobbin included?
Yes, one nylon boat shuttle bobbin is included. At the loom it pays to have a few more so you can prepare several bobbins ahead.
Do I need to assemble the winder?
No. It arrives fully assembled, you only need to clamp it to the table.
How do I wind an even bobbin?
Guide the yarn loosely back and forth with your free hand and build up the ends a little more than the middle. That way the yarn does not slip off the sides and the bobbin unwinds smoothly in the shuttle.
Can I do without a bobbin winder?
For the odd bobbin you can wind by hand, but it takes much longer and often ends up uneven. If you weave at the loom regularly, a bobbin winder saves a lot of time.

Our promises
-
Our price promise
We want you to fall in love with weaving, not give up because of the price. Seen a better offer somewhere? Just let us know.
-
Personal advice
Not sure which loom is right for you? Send us an email or use the form below. We are not tied to any manufacturer and will tell you honestly which model suits your projects.
-
Pay by invoice, free shipping from €1,000
You can pay conveniently by invoice. Orders from €1,000 also ship free of charge.


